Commands
Included:
Command Examples
HDRBEAM draws header beams
over APS door and window blocks.
Select a door or window block and then select from one of 20
customizable beam notes (or type a custom one if you prefer) and a beam is
drawn complete with note selected.
HIPSET draws a hipped truss set in a roof framing plan.
Select the outside wall lines and roof plan hip lines as shown above-left and the hip set will be drawn. It can be configured to do single or double line
trusses and many other options.
The command adjusts for uneven pitches and small roofs.
JHANG is a command to draw
metal "Joist" hanger symbols at the ends of framing members by drawing a line
crossing near the ends of the framing member’s lines.
It can handle both single and double-line framing and can be configured to
only draw hangers on lines that are on specific layers so it will only draw
hangers on the lines that represent your framing
JSTCALL draws a leader
across joists or trusses etc. to call out the type and spacing. The text
inserted can be selected by using customizable preset buttons or by typing it
in. The command can trim around the text after it is inserted to insure
readability.
The ROOFPLAN command
draws the roof plan lines for sloped roofs (including roofs with uneven pitches)
and can draw any one of four roof styles to make laying out your roof plan
simple and quick.
|
SCALECHECK
