CMU CONFIGURATION

Main Configuration Dialog
Detailer Commands
CMU

Configuration dialog:

Click on an area of the dialog below to go to the description for that area:

The button keeps changes made and closes the dialog.

The button discards changes made and closes the dialog.

The button brings you to this web page for help during the command (without canceling).

Breakdown of configuration options

Color and Lineweight for CMU

Command affected:  CMU

Select the color and lineweight for the outline of the CMU (how to select colors). If you are using release 14 or earlier the lineweight value will have no effect, but we encourage you to set it so you won't have to later when you upgrade.

Back to top

Scale Factor to Omit Hatching

Command affected:  CMU

This value controls the scale factor that is the "cut off" for whether the hatch below is used. If the drawing's scale factor is below or equal to this number the hatch will be drawn. If it is above this number it will not be drawn. If you don't want hatch to be drawn no matter what the scale of the drawing enter 0 (zero). How to figure the scale factor.

Back to top

Hatch Pattern for Block

Command affected:  CMU

Select the hatch pattern for the block fill.

Back to top

Color and Lineweight for Block Hatch

Command affected:  CMU

Select the color and lineweight for the block hatch fill (How to select colors). If you are using release 14 or earlier the lineweight value will have no effect now, but we encourage you to set it so you won't have to later when you upgrade.

Back to top

Rotation for Block Hatch

Command affected:  CMU

Enter the rotation you would like for the block hatch pattern. This value should be entered in degrees format. (-360.0 through 360.0)

Back to top

Scale Factor for Block Hatch

Command affected:  CMU

Enter the scale factor that you would like to use for the above hatch pattern. If you would like to have the hatch pattern scale with the scale of the drawing (recommended) check the "Adjust" box. This helps maintain a uniformity in details no matter what the scale. When adjusting the scale factor with the drawing's scale, the value entered should be the value you would use if the drawing were full size (scale factor of 1.0).

Back to top

Hatch Pattern for Solid Grout in Cells

Command affected:  CMU

Select the hatch pattern for the grout fill.

Back to top

Color and Lineweight for Grout Hatch

Command affected:  CMU

Select the color and lineweight for the hatch fill (How to select colors). If you are using release 14 or earlier the lineweight value will have no effect now, but we encourage you to set it so you won't have to later when you upgrade.

Back to top

Scale Factor for Grout Hatch

Command affected:  CMU

Enter the scale factor that you would like to use for the above hatch pattern. If you would like to have the hatch pattern scale with the scale of the drawing (recommended) check the "Adjust" box. This helps maintain a uniformity in details no matter what the scale. When adjusting the scale factor with the drawing's scale, the value entered should be the value you would use if the drawing were full size (scale factor of 1.0).

Back to top