APS-CONFIG - Plywood
.
Architectural Production Software 2005

PLYWOOD CONFIGURATION

Main Configuration Dialog
Detailer Commands
Plywood

Configuration dialog:

Click on an area of the dialog below to go to the description for that area:

The button keeps changes made and closes the dialog.

The button discards changes made and closes the dialog.

The button brings you to this web page for help during the command (without canceling).

 

Breakdown of configuration options

Color and Lineweight for Plywood

Command affected:  PLYWD

Select the color and lineweight for the outline of the plywood (how to select colors). If you are using release 14 or earlier the lineweight value will have no effect, but we encourage you to set it so you won't have to later when you upgrade.

back2top

 

Color and Lineweight for Lamination Lines

Command affected:  PLYWD

Select the color and lineweight for the lamination lines inside the plywood (how to select colors). If you are using release 14 or earlier the lineweight value will have no effect, but we encourage you to set it so you won't have to later when you upgrade.

back2top

 

Scale Factor to Omit Hatching

Command affected:  PLYWD

This value controls the scale factor that is the "cut off" for whether the hatch below is used. If the drawing's scale factor is below or equal to this number the hatch will be drawn. If it is above this number it will not be drawn. If you don't want hatch to be drawn no matter what the scale of the drawing enter 0 (zero). How to figure the scale factor.

back2top

 

Hatch Pattern

Command affected:  PLYWD

Select the hatch pattern for the fill.

back2top

 

Color and Lineweight for Hatch

Command affected:  PLYWD

Select the color and lineweight for the hatch fill (How to select colors). If you are using release 14 or earlier the lineweight value will have no effect now, but we encourage you to set it so you won't have to later when you upgrade.

back2top

 

Scale Factor for Hatch

Command affected:  PLYWD

Enter the scale factor that you would like to use for the above hatch pattern. If you would like to have the hatch pattern scale with the scale of the drawing (recommended) check the "Adjust" box. This helps maintain a uniformity in details no matter what the scale. When adjusting the scale factor with the drawing's scale, the value entered should be the value you would use if the drawing were full size (scale factor of 1.0).

back2top

Is there anything that you find confusing or difficult? Please let us know so we can help!

Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited.
Legal Notices and Trademarks | Privacy Policy | Contact KLH Software
Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.