ANGSEC
.
User's Manual Getting Started Setup & Configuration Documentation	Sales Support Software Support Troubleshooting

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010

STEEL ANGLE SECTION

Component of the Detailer command that draws steel angle sections.

User configurable options:

Color and lineweight for angle section
Scale factor above which no hatch or fills will be drawn
Hatch pattern, scale, and rotation
Whether hatch pattern scale should adjust w/ drawing scale
Color and lineweight for hatch pattern

See Strct Stl Angles in the Section/Detail Cmds section of the APS Configuration Utility.

Layers:

If you are using "No Layer Control" the symbol will be inserted on whatever layer is current. See the Layer Control section of the APS Configuration Utility.

The default layer type for the outline of the angle is "Metal (structural)" and the default layer type for the hatching is "Metal (structural) fills".
- If you are using "Direct Layer Assignment" the layer names are assigned to these layer types in the Layer assignments portion of the Layer Control section of the APS-CONFIG command.
- If you are using "Layer Schemes" the layer names are assigned to these layer types in the Assigning Layer Names to Layer Types portion of the SCHEMEDIT command.
The layer types for this command can be changed in the Assigning Layer Types to Commands portion of the Layer Control section of the APS-CONFIG command.

Known limitations:

None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

None reported. If you have an alternate use for this command submit it here.

SAMPLE ANGSEC COMMAND SYNTAX:

Command:
Command: ANGSEC

The following dialog will appear:

The button will take you to the main selection screen of the detailer command.

The button brings you to this web page for help during the command (without canceling)
Select the size angle that you would like. Note: the angles are sorted from smallest to largest with the longer leg dimension first. So if you were looking for an angle that was 3"x2" scroll down to the 3" angles.

Once an angle size has been selected the thickness choices appear. Select the thickness for the angle.

Select point for the corner of the angle:

Select the point. The endpoint and intersection snaps are added to your running object snaps if not already being used.

Select a point along longest leg:

Ortho is turned on for this point. (Turn it off with <F8> or to draw other angles.) Select the point. This point shows the command the direction to draw the longest leg of the angle. The nearest snap is added to your running object snaps if not already being used. The length of the line drawn does not affect the size of the angle.

Select side for short leg:

Select a point on the side that you would like the angle to go. A dashed white line shows the direction of the longest leg for reference.

--The angle is drawn--