APS-DONUT . User's Manual Getting Started Setup & Configuration Documentation Sales Support Software Support Troubleshooting

Keyboard shortcut: DO
Toolbar button:   Uses AutoCAD's default toolbar button for the command replaced
Compatible with AutoCAD Versions: 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010

(SOLID) DONUT

Equivalent AutoCAD command:  DONUT

Added functionality,  features, or special conditions:

• Always creates donuts with an interior diameter of 0.0.
• Uses the Distance/Length dialog for entering the outside diameter.

User configurable options: none

Layers:

• The donut will be inserted on whatever layer is current.

Known limitations:

• The inside diameter of the donut is always zero.

• Submit a limitation not listed.

Alternate uses:

• None reported. If you have an alternate use for this command submit it here.

SAMPLE APS-DONUT COMMAND SYNTAX:

Command:
Command: DO
Command: APS-DONUT

The following dialog appears:

Type a value in the box or use the buttons to enter the outside diameter for the donut. 

Speed Tip: After each of the buttons is pressed the button is highlighted. This allows you to use the <Enter> or <Space> keys to press the button after entering a value with the button keys. The fraction keys will also close this dialog: pressing the and then the button will enter a value of 1 1/2 and close the dialog without the need to press the button.

For more on using this dialog see the Distance/Length dialog.

 

Specify center of donut or <exit>:

Select the point for the center of the donut. 

--the donut is drawn--

 

Specify center of donut or <exit>:

Continue entering donuts. Press <Enter> or <Space> to stop. 

Solutions to common questions and problems with this command

Is there anything that you find confusing or difficult? Please let us know so we can help! © Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited. Legal Notices and Trademarks | Privacy Policy | Contact KLH Software Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.