DRJAMB
.
User's Manual Getting Started Setup & Configuration Documentation	Sales Support Software Support Troubleshooting

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010

HOLLOW METAL DOOR JAMB

This portion of the Detailer command draws hollow metal door jambs.

User configurable options:

Color and lineweight for jamb
Dimensions of various parts of the jamb
Distance from end of wall to inside face of jamb

See HM Dr Jamb in the Section/Detail Cmds section of the APS Configuration Utility.

Layers:

If you are using "No Layer Control" the jamb will be drawn on whatever layer is current. See the Layer Control section of the APS Configuration Utility.

The default layer type for the door jamb is "Metal (misc)".
- If you are using "Direct Layer Assignment" the layer name is assigned to this layer type in the Layer assignments portion of the Layer Control section of the APS-CONFIG command.
- If you are using "Layer Schemes" the layer name is assigned to this layer type in the Assigning Layer Names to Layer Types portion of the SCHEMEDIT command.
The layer type for this command can be changed in the Assigning Layer Types to Commands portion of the Layer Control section of the APS-CONFIG command.

Known limitations:

None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

None reported. If you have an alternate use for this command submit it here.

SAMPLE DRJAMB COMMAND SYNTAX:

Command:
Command: DRJAMB

The following dialog appears:

The button will take you to the main selection screen of the detailer command.

The button brings you to this web page for help during the command (without canceling)
Verify the jamb type & sizes indicated and press OK.

Note: A size of 0.0 on the non door side rabbet will make it squared off w/ no rabbet on that side.

Select first jamb corner:

Select the corner of one side of the wall. The intersection and endpoint object snaps will be added to your running snaps if they are not already being used.

Select second jamb corner or [D]ist/[L]ength/direction dialog:

Select the other corner of the wall or type "D" or "L" for the Distance/Length & direction dialog. Once again the intersection and endpoint object snaps will be added to your running snaps if they are not already being used.

Select side for the jamb:

Select the side that the jamb should be on.

Side for door:

If the door side rabbet and the non door side rabbet are not the same size you will be asked to choose the side for the door. The white dashed line that appears is to help locate the border between sides. Select a point on one side or the other of the white line.

--the door jamb is drawn--