Keyboard shortcut: none
Toolbar button: 
Compatible with AutoCAD Versions:
2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010BIFOLD DOOR ELEVATIONS
This command creates and inserts bifold door elevation blocks.
User configurable options:
- Whether to insert grids in doors w/ glass & grid style to use
- Color & lineweight for inside frame
- Color & lineweight for outside frame
- Color & lineweight for raised panels
- Color & lineweight for trim lines
- Whether to draw trim lines
- Thickness for trim lines
- Door frame thickness
- Distance to raised panels
See Door Elevations in the
Elevation Cmds section of the
APS-CONFIG command.
Layers:
Known limitations:
Alternate uses:
SAMPLE BFDOORELV COMMAND SYNTAX:
Command: BFDOORELV
The following dialog appears:
Select the size you want. You may either use the preset
size buttons or enter a custom size in the boxes above.
The following dialog appears:
Most bifold doors are interior doors, so "Interior" is checked. The difference between exterior and interior doors is simply whether or not
the trim is drawn below finished floor. Trim can be drawn below finished floor
so that the trim will be drawn down to the bottom of the siding. (The distance
that the trim goes below the finished floor is set in the Door Elevations
portion of the APS-CONFIG
command). Interior doors will not have trim below the finished
floor.
Select the door style for the bifold doors by clicking on the appropriate
style in the image.
Insertion point:
Select the insertion point for the door. The insertion base point for the
door is the bottom left corner of the door (not the trim or frame). The intersection snap is added to your running object snaps if not already
being used.
Rotation angle <0.0000>:
Select or enter the rotation angle for the door. The default is 0.0 so
you usually can just press <Enter> or <Space>.
--the door is inserted--
Related Commands
BPDOORELV Command to create and
insert blocks of bipass door elevations.
CWINDELV Command to draw commercial
window elevations.
DBLDOORELV Command to create and
insert blocks of double door elevations.
DPKDOORELV Command to create and
insert blocks of double pocket door elevations.
OHDOORELV Command to create and
insert blocks of overhead door elevations.
PATDOORELV Command to create and
insert blocks of patio door elevations.
RWINDELV Command to create and insert
blocks of residential window elevations.
SGDOORELV Command to create and
insert blocks of sliding glass door elevations.
SGLDOORELV Command to create and
insert blocks of single door elevations.
SPKDOORELV Command to create and
insert blocks of single pocket door elevations.
WGRID Command that will add/remove grids in
the glass of a door or window.
EXP2LAYR
Command to explode blocks and have all the entities in the block changed to the
layer that the block was on. While there are drawbacks to exploding the blocks
(the WGRID command above will no longer work) there are times when the doors
and/or windows must be modified. This command will allow you to explode the
block without all of the door and window objects going to the "0"
layer.
 |
