 DWG-SCAL |
||
| . | ||
|
||
 |
||
| ||||||||||||
Keyboard shortcut: none
Toolbar button: none
Compatible with AutoCAD Versions:
2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010
The drawing scale command tells you the size and scale factor of the current drawing based on the LIMITS and DIMSCALE of the drawing. The size given is the plotted sheet size.
User configurable options: none
Known limitations:
None reported. If there is something this command will not do that you think it should please let us know.
Alternate uses:
None reported. If you have an alternate use for this command submit it here.
Command: DWGSCALE
--the plotted sheet size and scale will be displayed on the command line--
Example:
If the drawing was set up with a DIMSCALE value of 96 and the limits were set to Bottom Left corner at 0.00,0.00 and Top Right corner at 3456.00,2304.00 the following information would be displayed:
Sheet Size: 24.0000 x 36.0000 Scale of Drawing: 1/8"=1'-0"
DWGSETUP Command to set up the size, scale and title/title block of a drawing.
SCALECHECK Allows you to change the current working scale in a drawing. Also a good tool to verify current scale.
| ||||||||||
