Architectural Production Software 2005

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013


This command inserts a hose bib symbol. It is a "wall block" so you insert this block by selecting a point on a wall or other object and then selecting a side for the symbol.

User configurable options: 


Known limitations:

  • None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

  • None reported. If you have an alternate use for this command submit it here.



Command: HOSEBIB

[if the object selected is a line or polyline]

Select wall line:

Select a wall line (or any object) at the point that you would like to insert the symbol.

Select side of wall for symbol:

Select a point on the side of the line for the symbol. Because the type of object selected was a line, polyline, or lwpolyline the command can determine the correct perpendicular angle to insert the block. There is no need to "show" or enter the exact angle the symbol should be inserted.

--The symbol is inserted.--


[if the object selected is something else]

Select wall line:

Select a wall line (or any object) at the point that you would like to insert the symbol. Since the entity type is NOT a line, polyline, or lwpolyline this command cannot figure out the rotation angle for you automatically. You will have to show it the insertion angle.

Specify insertion angle or use the [A]ng[L]e/[D]irection dialog:

Ortho is turned on for this point. (Turn it off with <F8> or to draw other angles.) Select a point, enter an angle, or press "A", "L", or "D" and use the AngLe/Direction dialog.

--The symbol is inserted.--


Solutions to common questions and problems with this command

Is there anything that you find confusing or difficult? Please let us know so we can help!

Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited.
Legal Notices and Trademarks | Privacy Policy | Contact KLH Software
Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.