 LAYRON |
||
| . | ||
|
||
 |
||
| ||||||||||||
Keyboard shortcut: LON
Toolbar button:
Compatible with AutoCAD Versions:
2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010
This command turns layers on. The layer names can be selected by typing them in and if using layer schemes you may select the layer names from either the "Layers" pull-down or from the screen menu.
Equivalent AutoCAD command: LAYER
Added functionality, features, or special conditions:
User configurable options: none
Known limitations:
None reported. If there is something this command will not do that you think it should please let us know.
Alternate uses:
None reported. If you have an alternate use for this command submit it here.
Command:
Command: LON
Command: LAYRON
(if using layer schemes and the screen menu)
Select layers from screen menu or type layers to turn ON:
<Enter/Space> when done:Entering layer names:
[Select from screen menu or pull-down]
If you are using layer schemes you may select layers from either the screen menu (shown at left) or from the "Layers" pull-down (shown at right). Select as many layers as you would like. You may also select the "V" above a section of layers. This selects the group of layers directly below it. If your list of layers is longer than your screen menu you may also select theline of the screen menu to bring up a dialog that allows access to all the layers of the current scheme.
Note: the layer names shown in both the screen menu and the pull down are abbreviations of the actual layer name. These abbreviations as well as the full layer name are defined in a layer scheme and can be edited using the SCHEMEDIT command.
To configure how layers are displayed on your screen when using layer schemes see the Layer scheme control settings portion of the Layer Control section of the APS Configuration Utility.
For more on using the screen menu or pull-down for layer control see Using layer schemes.
[Type layers]
Obviously you can also just type in the layer name or names. Separate multiple layer names with a comma ",". You may also use wildcards.With each of the above layer entry methods the layer name(s) selected are displayed during selection at the command line to help you to know the layers that you have selected.
<Enter/Space> when done: A-DOOR-01
<Enter/Space> when done: A-RMNM-01
<Enter/Space> when done: P-FIXT-01
<Enter/Space> when done: A-WALL-PATT-01
<Enter/Space> when done:When done selecting layer names to turn on press <Enter> or <Space>.
--the layers chosen are turned on--
CHLAYR Command to change the layer of objects with several methods for entering new layer name.
FZLYR Command to freeze layers with several methods for entering layer names.
LAYRISO Command to isolate layers with several methods for entering layer names.
LAYRLOCK Command to lock layers with several methods for entering layer names.
LAYROFF Command to turn layers off with several methods for entering layer names.
LAYRSET Command to set current layer with several methods for entering layer name.
LAYRUNLOCK Command to unlock layers with several methods for entering layer names.
RGNLAYR Command to regenerate a layer without regenerating the entire drawing.
| ||||||||||
