LVLBEAM . User's Manual Getting Started Setup & Configuration Documentation Sales Support Software Support Troubleshooting

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010

LAMINATED VENEER LUMBER BEAMS

Component of the Detailer command that draws LVL beams of various sizes in section.

User configurable options: 

• Color and lineweight for beam outline
• Scale factor above which no hatch or fills will be drawn
• Hatch scale
• Whether hatch pattern scale should adjust w/ drawing scale
• Color and lineweight for hatch pattern

See LVL Beam in the Section/Detail Cmds section of the APS-CONFIG command. 

Layers:

• If you are using "No Layer Control" the beam is drawn on whatever layer is current. See the Layer Control section of the APS-CONFIG command.

• The default layer type for the beam is "Wood (framing/struct)".
  • If you are using "Direct Layer Assignment" the layer name is assigned to this layer type in the Layer assignments portion of the Layer Control section of the APS-CONFIG command.
  • If you are using "Layer Schemes" the layer name is assigned to this layer type in the Assigning Layer Names to Layer Types portion of the SCHEMEDIT command.

  The layer type for this command can be changed in the Assigning Layer Types to Commands portion of the Layer Control section of the APS-CONFIG command.  

Known limitations:

• None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

• None reported. If you have an alternate use for this command submit it here.

SAMPLE GLULAM COMMAND SYNTAX:

Command:
Command: LVLBEAM

The following dialog appears:

The button will take you to the main selection screen of the detailer command.

The button brings you to this web page for help during the command (without canceling)

Select the width you would like and press one of the height buttons or enter a custom width and height in the boxes and press "Draw Custom Size".

 

Select corner point of the LVL beam or <Enter> to center:

Select the corner point or press <Enter> or <Space> to center the beam.

[corner point option] Selected the corner point (from above prompt). The endpoint and intersection snaps are added to your running object snaps if not already being used.   Enter direction along long side of LVL beam or [A]ng[L]e/[D]irection dialog: Ortho is turned on for this point. (Turn it off with <F8> or to draw other angles.) Select a point, enter an angle, or press "A", "L", or "D" and use the AngLe/Direction dialog. Note: When drawing a line, the length of the line does not affect the length of the beam.   Side for LVL beam thickness: Select the side that the beam should reside. The white dashed line that appears is to show the direction that the long side of the beam is going to be drawn. This is especially helpful in selecting a side when you specify an angle without other objects around for reference.   -the beam is drawn- [End - corner point option]

[center option] The following dialog appears: Select the orientation that you would like.    Enter center point for LVL beam: Select the center point for the beam. The midpoint snap is added to your running object snaps if it is not already being used.   Enter second point along centerline of LVL beam or [A]ng[L]e/[D]irection dialog: Ortho is turned on for this point. (Turn it off with <F8> or to draw other angles.) Select a point, enter an angle, or press "A", "L", or "D" and use the AngLe/Direction dialog. Note: When drawing a line, the length of the line does not affect the size of the beam.   --the beam is drawn-- [End - center option]

Solutions to common questions and problems with this command

Related Commands

DETAILER  A dialog for selecting one of the many materials that can be drawn.

Is there anything that you find confusing or difficult? Please let us know so we can help! © Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited. Legal Notices and Trademarks | Privacy Policy | Contact KLH Software Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.