MEDCAB Translate

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 13, 14, 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008

MEDICINE CABINET

This command draws a medicine cabinet (in plan) a specified distance from a corner in a wall (or any other intersection).

User configurable options: 

• Distance to offset centerline of cabinet from wall corner
• Linetype, color, and lineweight for cabinet
• Size of cabinet

See "MEDCAB" Command in the Floor Plan Cmds section of the APS Configuration Utility. 

Layers:

• If you are using "No Layer Control" the symbol will be inserted on whatever layer is current. See the Layer Control section of the APS Configuration Utility.

• The default layer type for this cabinet is "Casework".
  • If you are using "Direct Layer Assignment" the layer name is assigned to this layer type in the Layer assignments portion of the Layer Control section of the APS-CONFIG command.
  • If you are using "Layer Schemes" the layer name is assigned to this layer type in the Assigning Layer Names to Layer Types portion of the SCHEMEDIT command.

  The layer type for this command can be changed in the Assigning Layer Types to Commands portion of the Layer Control section of the APS-CONFIG command.  

Known limitations:

• None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

• None reported. If you have an alternate use for this command submit it here.

SAMPLE MEDCAB COMMAND SYNTAX:

Command:
Command: MEDCAB

The following dialog appears:

The button brings you to this web page for help during the command (without canceling).

Select the width button that you would like for the medicine cabinet.

 

Select wall near back corner of vanity:

Select the wall line near the wall corner.

 

Select point on side of vanity:

Select a point on the side the medicine cabinet should open.

 

--the medicine cabinet is drawn--

Solutions to common questions and problems with this command

Related Commands

ONESINK  Command to insert a single sink centered in a vanity top.

TOILET  Command to insert a toilet either centered in a space or offset from a corner.

TUB  Command to draw a bath tub.

TWOSINK  Command to insert two sinks spaced equally in a vanity top.

Is there anything that you find confusing or difficult? Please let us know so we can help! © Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited. Legal Notices and Trademarks | Privacy Policy | Contact KLH Software Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.