PLYWD . User's Manual Getting Started Setup & Configuration Documentation Sales Support Software Support Troubleshooting

Keyboard shortcut: PLY
Toolbar button:
Compatible with AutoCAD Versions: 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010

PLYWOOD

Component of the Detailer command that draws plywood of any length in section. 

User configurable options: 

• Color and lineweight for plywood outline
• Color and lineweight for lamination lines
• Scale factor above which no hatch or fills will be drawn
• Hatch pattern and scale to use for fill
• Whether hatch pattern scale should adjust w/ drawing scale
• Color and lineweight for hatch pattern

See Plywood in the Section/Detail Cmds section of the APS Configuration Utility. 

Layers:

• If you are using "No Layer Control" the plywood outline and fills will be drawn on whatever layer is current. See the Layer Control section of the APS Configuration Utility.

• The default layer type for the outline of the plywood is "Wood (framing/struct)" and the default layer type for the hatching is "Wood (framing/struct) fills". 
  • If you are using "Direct Layer Assignment" the layer names are assigned to these layer types in the Layer assignments portion of the Layer Control section of the APS-CONFIG command.
  • If you are using "Layer Schemes" the layer names are assigned to these layer types in the Assigning Layer Names to Layer Types portion of the SCHEMEDIT command.

  The layer types for this command can be changed in the Assigning Layer Types to Commands portion of the Layer Control section of the APS-CONFIG command.  

Known limitations:

• None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

• None reported. If you have an alternate use for this command submit it here.

SAMPLE PLYWD COMMAND SYNTAX:

Command:
Command: PLY
Command: PLYWD

The following dialog will appear:

The button will take you to the main selection screen of the detailer command.

The button brings you to this web page for help during the command (without canceling)

If the thickness shown in the box is what you want press <Enter>, <Space> or the button, if not, press one of the preset thickness buttons or enter a thickness in the box and press .

 

Select start point for plywood:

Select the start point. The endpoint and intersection object snaps are added to your running snaps if they are not being used already.

 

Select end point or [D]ist/[L]ength/direction dialog:

Select the end point for the plywood or type "D" or "L" to enter the point relative to the first point with the Distance/Length & direction dialog. This time the endpoint, intersection and perpendicular object snaps are added to your running snaps if they are not being used already.

 

Select side for thickness:

Select the side.

 

--the plywood is drawn--

Solutions to common questions and problems with this command

Related Commands

DETAILER  A dialog for selecting one of the many materials that can be drawn.

Is there anything that you find confusing or difficult? Please let us know so we can help! © Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited. Legal Notices and Trademarks | Privacy Policy | Contact KLH Software Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.