SCLOSE14 . User's Manual Getting Started Setup & Configuration Documentation Sales Support Software Support Troubleshooting

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 2000, 2000i, 2002

SAVEAS R14 AND CLOSE

This command saves the drawing in AutoCAD release 14 format and closes the drawing.

User configurable options: none

Known limitations:

• None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

• None reported. If you have an alternate use for this command submit it here.

SAMPLE SCLOSE14 COMMAND SYNTAX:

Command:
Command: SCLOSE14

--the drawing is saved in release 14 format and closed--

You may now create a new drawing by pressing the button or open an existing drawing by using the button in the toolbar that shows at the upper left corner of the screen as shown above. Of course you may also use the "File" pull-down if you prefer.

To quit AutoCAD, press the "X" at the top right of the screen ( ) or choose "Exit" from the "File" pull down.

Solutions to common questions and problems with this command

Related Commands

TPSCLOSE  Command to update the title block, purge, save, and close the drawing with options of where to go from there.

PSCLOSE  Command to purge, save, and close the drawing with options of where to go from there.

SCLOSE  Command to save and close the drawing with options of where to go from there.

TPSCLOSE14  Command to update the title block, purge, save in release 14 format, and close the drawing with options of where to go from there.

PSCLOSE14  Command to purge, save in release 14 format, and close the drawing with options of where to go from there.

TPSCLOSE13  Command to update the title block, purge, save in release 13 format, and close the drawing with options of where to go from there.

PSCLOSE13  Command to purge, save in release 13 format, and close the drawing with options of where to go from there.

SCLOSE13  Command to save in release 13 format and close the drawing with options of where to go from there.

TPSCLOSE12  Command to update the title block, purge, save in release 12 format, and close the drawing with options of where to go from there.

PSCLOSE12  Command to purge, save in release 12 format, and close the drawing with options of where to go from there.

SCLOSE12  Command to save in release 12 format and close the drawing with options of where to go from there.

Is there anything that you find confusing or difficult? Please let us know so we can help! © Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited. Legal Notices and Trademarks | Privacy Policy | Contact KLH Software Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.