TPSCLOSE2K . User's Manual Getting Started Setup & Configuration Documentation Sales Support Software Support Troubleshooting

Keyboard shortcut: none
Toolbar button:
Compatible with AutoCAD Versions: 2004, 2005, 2006

UPDATE TITLE BLOCK, PURGE, SAVEAS R2000, AND CLOSE

This command updates the title block, purges the drawing of any unused "junk", saves in AutoCAD release 2000 format, and closes the drawing. For more information on updating the title block see the TB-UPDAT command.

User configurable options: 

• What specific types of items to purge or "all"

See "TPSClose" and "PSClose" Commands in the General section of the APS-CONFIG command. 

Known limitations:

• None reported. If there is something this command will not do that you think it should please let us know.

Alternate uses:

• None reported. If you have an alternate use for this command submit it here.

SAMPLE TPSCLOSE2K COMMAND SYNTAX:

Command:
Command: TPSCLOSE2K

--the title block is updated then the drawing is purged, saved in release 2000 format, and closed--

You may now create a new drawing by pressing the button or open an existing drawing by using the button in the toolbar that shows at the upper left corner of the screen as shown above. Of course you may also use the "File" pull-down if you prefer.

To quit AutoCAD, press the "X" at the top right of the screen ( ) or choose "Exit" from the "File" pull down.

Solutions to common questions and problems with this command

Related Commands

TPSCLOSE  Command to update the title block, purge, save, and close the drawing with options of where to go from there.

PSCLOSE  Command to purge, save, and close the drawing with options of where to go from there.

SCLOSE  Command to save and close the drawing with options of where to go from there.

TPSCLOSE2K  Command to update the title block, purge, save in release 2000 format, and close the drawing.

PSCLOSE2K  Command to purge, save in release 2000 format, and close the drawing.

SCLOSE2K  Command to save in release 2000 format and close the drawing.

Is there anything that you find confusing or difficult? Please let us know so we can help! © Copyright 2006 KLH Software, Inc. All rights reserved. Reproduction or copying of content or images is prohibited. Legal Notices and Trademarks | Privacy Policy | Contact KLH Software Autodesk, AutoCAD, AutoCAD Architectural Desktop, AutoLISP, and Visual LISP are either registered trademarks or trademarks of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders.