	WGRID Translate

Keyboard shortcut: WG
Toolbar button:
Compatible with AutoCAD Versions: 13, 14, 2000, 2000i, 2002, 2004, 2005, 2006, 2007, 2008

WINDOW GRID TOGGLE

This command inserts or removes a window grid. It can place a grid in any of the door or window elevation blocks that has a window in it. If the selected door/window has a grid already in it already the grid is removed, if the door/window doesn't have a grid this command lets you choose the style and adds it.

User configurable options: none

Layers:

The grids are a part of the door or window block and therefore are on whatever layer the door or window block is on.

Known limitations:

This command can only add or remove grids from door or window elevation blocks. Once the block is exploded this command cannot add or remove the grids.
Submit a limitation not listed.

Alternate uses:

None reported. If you have an alternate use for this command submit it here.

SAMPLE WGRID COMMAND SYNTAX:

Command:
Command: WG
Command: WGRID

[Door or window without grid]

Window Grid Toggle...
Select door or window to change:

Select the door or window elevation block that you would like to add grids to. The following dialog appears:

Select the grid style that you would like for your door or window by clicking on the image of the style as shown.

--the grids are drawn in the door or window selected--

[end - Door or window without grid]

[Door or window with grid]

Window Grid Toggle...
Select door or window to change:

Select the door or window elevation block that you would like to remove the grids from.

--the grids are removed from the door or window--

[end - Door or window with grid]

Note: To change the style of a door or window's grid you must first remove the grid and then add it again choosing the correct style.