|
The APS software comes
with two tablet layouts. The first is meant to fit inside the standard AutoCAD
tablet area 1 and the second was created from scratch and is meant to completely
replace the standard AutoCAD
tablet layout.
This menu template is meant to fit in the standard AutoCAD tablet area 1
shown in the image below:
The
APS tablet area 1 looks like
this:
A drawing file of the above layout can be found in the
"Tablet dwgs" folder. You may also download a drawing of it
here.
The following tablet layout has been designed to replace the standard AutoCAD
tablet layout completely. Its layout
looks like this:
This tablet layout is for all supported AutoCAD versions.
Items that will not work in this tablet layout by version:
2000, 2000i, 2002, 2004, 2005, & 2006 - All work
14 - QDIMENSION, LNWEIGHT, PAGE SETUP & ZOOM REALTIME
commands
14 - EXTENSION & PARALLEL object snaps
13 - all items listed in "14" above + XCLIP command
A drawing file of the above layout can be found in the
"Tablet dwgs" folder. You may also download a drawing of it
here.
| 
